.. index:: single: security .. _security_chapter: Security ======== :app:`Pyramid` provides an optional, declarative security system. The system determines the identity of the current user (authentication) and whether or not the user has access to certain resources (authorization). The :app:`Pyramid` security system can prevent a :term:`view` from being invoked based on the :term:`security policy`. Before a view is invoked, the authorization system can use the credentials in the :term:`request` along with the :term:`context` resource to determine if access will be allowed. Here's how it works at a high level: - A user may or may not have previously visited the application and supplied authentication credentials, including a :term:`userid`. If so, the application may have called :func:`pyramid.security.remember` to remember these. - A :term:`request` is generated when a user visits the application. - Based on the request, a :term:`context` resource is located through :term:`resource location`. A context is located differently depending on whether the application uses :term:`traversal` or :term:`URL dispatch`, but a context is ultimately found in either case. See the :ref:`urldispatch_chapter` chapter for more information. - A :term:`view callable` is located by :term:`view lookup` using the context as well as other attributes of the request. - If a :term:`security policy` is in effect and the :term:`view configuration` associated with the view callable that was found has a :term:`permission` associated with it, the policy is passed :term:`request`, the :term:`context`, and the :term:`permission` associated with the view; it will allow or deny access. - If the security policy allows access, the view callable is invoked. - If the security policy denies access, the view callable is not invoked. Instead the :term:`forbidden view` is invoked. The security system is enabled by modifying your application to include a :term:`security policy`. :app:`Pyramid` comes with a variety of helpers to assist in the creation of this policy. .. index:: single: security policy .. _writing_security_policy: Writing a Security Policy ------------------------- :app:`Pyramid` does not enable any security policy by default. All views are accessible by completely anonymous users. In order to begin protecting views from execution based on security settings, you need to write a security policy. Security policies are simple classes implementing :class:`pyramid.interfaces.ISecurityPolicy`. A simple security policy might look like the following: .. code-block:: python :linenos: from pyramid.security import Allowed, Denied class SessionSecurityPolicy: def identity(self, request): """ Return app-specific user object. """ userid = request.session.get('userid') if userid is None: return None return load_identity_from_db(request, userid) def authenticated_userid(self, request): """ Return a string ID for the user. """ identity = self.identity(request) if identity is None: return None return string(identity.id) def permits(self, request, context, permission): """ Allow access to everything if signed in. """ identity = self.identity(request) if identity is not None: return Allowed('User is signed in.') else: return Denied('User is not signed in.') def remember(request, userid, **kw): request.session['userid'] = userid return [] def forget(request, **kw): del request.session['userid'] return [] Use the :meth:`~pyramid.config.Configurator.set_security_policy` method of the :class:`~pyramid.config.Configurator` to enforce the security policy on your application. .. seealso:: For more information on implementing the ``permits`` method, see :ref:`security_policy_permits`. Writing a Security Policy Using Helpers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To assist in writing common security policies, Pyramid provides several helpers. The following authentication helpers assist with implementing ``identity``, ``remember``, and ``forget``. +-------------------------------+-------------------------------------------------------------------+ | Use Case | Helper | +===============================+===================================================================+ | Store the :term:`userid` | :class:`pyramid.authentication.SessionAuthenticationHelper` | | in the :term:`session`. | | +-------------------------------+-------------------------------------------------------------------+ | Store the :term:`userid` | :class:`pyramid.authentication.AuthTktCookieHelper` | | with an "auth ticket" cookie. | | +-------------------------------+-------------------------------------------------------------------+ | Retrieve user credentials | Use :func:`pyramid.authentication.extract_http_basic_credentials` | | using HTTP Basic Auth. | to retrieve credentials. | +-------------------------------+-------------------------------------------------------------------+ | Retrieve the :term:`userid` | ``REMOTE_USER`` can be accessed with | | from ``REMOTE_USER`` in the | ``request.environ.get('REMOTE_USER')``. | | WSGI environment. | | +-------------------------------+-------------------------------------------------------------------+ For example, our above security policy can leverage these helpers like so: .. code-block:: python :linenos: from pyramid.security import Allowed, Denied from pyramid.authentication import SessionAuthenticationHelper class SessionSecurityPolicy: def __init__(self): self.helper = SessionAuthenticationHelper() def identity(self, request): """ Return app-specific user object. """ userid = self.helper.authenticated_userid(request) if userid is None: return None return load_identity_from_db(request, userid) def authenticated_userid(self, request): """ Return a string ID for the user. """ identity = self.identity(request) if identity is None: return None return str(identity.id) def permits(self, request, context, permission): """ Allow access to everything if signed in. """ identity = self.identity(request) if identity is not None: return Allowed('User is signed in.') else: return Denied('User is not signed in.') def remember(request, userid, **kw): return self.helper.remember(request, userid, **kw) def forget(request, **kw): return self.helper.forget(request, **kw) Helpers are intended to be used with application-specific code. Notice how the above code takes the userid from the helper and uses it to load the :term:`identity` from the database. ``authenticated_userid`` pulls the :term:`userid` from the :term:`identity` in order to guarantee that the user ID stored in the session exists in the database ("authenticated"). .. index:: single: permissions single: protecting views .. _protecting_views: Protecting Views with Permissions --------------------------------- To protect a :term:`view callable` from invocation based on a user's security settings when a particular type of resource becomes the :term:`context`, you must pass a :term:`permission` to :term:`view configuration`. Permissions are usually just strings, and they have no required composition: you can name permissions whatever you like. For example, the following view declaration protects the view named ``add_entry.html`` when the context resource is of type ``Blog`` with the ``add`` permission using the :meth:`pyramid.config.Configurator.add_view` API: .. code-block:: python :linenos: # config is an instance of pyramid.config.Configurator config.add_view('mypackage.views.blog_entry_add_view', name='add_entry.html', context='mypackage.resources.Blog', permission='add') The equivalent view registration including the ``add`` permission name may be performed via the ``@view_config`` decorator: .. code-block:: python :linenos: from pyramid.view import view_config from resources import Blog @view_config(context=Blog, name='add_entry.html', permission='add') def blog_entry_add_view(request): """ Add blog entry code goes here """ pass As a result of any of these various view configuration statements, if an security policy is in place when the view callable is found during normal application operations, the security policy will be queried to see if the requesting user is allowed the ``add`` permission within the current :term:`context`. If the policy allows access, ``blog_entry_add_view`` will be invoked. If not, the :term:`Forbidden view` will be invoked. .. _security_policy_permits: Allowing and Denying Access With a Security Policy ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To determine whether access is allowed to a view with an attached permission, Pyramid calls the ``permits`` method of the security policy. ``permits`` should return an instance of :class:`pyramid.security.Allowed` or :class:`pyramid.security.Denied`. Both classes accept a string as an argument, which should detail why access was allowed or denied. A simple ``permits`` implementation that grants access based on a user role might look like so: .. code-block:: python :linenos: from pyramid.security import Allowed, Denied class SecurityPolicy: def permits(self, request, context, permission): identity = self.identity(request) if identity is None: return Denied('User is not signed in.') if identity.role == 'admin': allowed = ['read', 'write', 'delete'] elif identity.role == 'editor': allowed = ['read', 'write'] else: allowed = ['read'] if permission in allowed: return Allowed( 'Access granted for user %s with role %s.', identity, identity.role, ) else: return Denied( 'Access denied for user %s with role %s.', identity, identity.role, ) .. index:: pair: permission; default .. _setting_a_default_permission: Setting a Default Permission ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If a permission is not supplied to a view configuration, the registered view will always be executable by entirely anonymous users: any security policy in effect is ignored. In support of making it easier to configure applications which are "secure by default", :app:`Pyramid` allows you to configure a *default* permission. If supplied, the default permission is used as the permission string to all view registrations which don't otherwise name a ``permission`` argument. The :meth:`pyramid.config.Configurator.set_default_permission` method supports configuring a default permission for an application. When a default permission is registered: - If a view configuration names an explicit ``permission``, the default permission is ignored for that view registration, and the view-configuration-named permission is used. - If a view configuration names the permission :data:`pyramid.security.NO_PERMISSION_REQUIRED`, the default permission is ignored, and the view is registered *without* a permission (making it available to all callers regardless of their credentials). .. warning:: When you register a default permission, *all* views (even :term:`exception view` views) are protected by a permission. For all views which are truly meant to be anonymously accessible, you will need to associate the view's configuration with the :data:`pyramid.security.NO_PERMISSION_REQUIRED` permission. .. index:: single: ACL single: access control list pair: resource; ACL .. _assigning_acls: Implementing ACL Authorization ------------------------------ A common way to implement authorization is using an :term:`ACL`. An ACL is a :term:`context`-specific list of access control entries, which allow or deny access to permissions based on a user's principals. Pyramid provides :class:`pyramid.authorization.ACLHelper` to assist with an ACL-based implementation of ``permits``. Application-specific code should construct a list of principals for the user and call :meth:`pyramid.authorization.ACLHelper.permits`, which will return an :class:`pyramid.authorization.ACLAllowed` or :class:`pyramid.authorization.ACLDenied` object. An implementation might look like this: .. code-block:: python :linenos: from pyramid.authorization import ACLHelper, Everyone, Authenticated class SecurityPolicy: def permits(self, request, context, permission): principals = [Everyone] if identity is not None: principals.append(Authenticated) principals.append('user:' + identity.id) principals.append('group:' + identity.group) return ACLHelper().permits(context, principals, permission) To associate an ACL with a resource, add an ``__acl__`` attribute to the resource object. This attribute can be defined on the resource *instance* if you need instance-level security, or it can be defined on the resource *class* if you just need type-level security. For example, an ACL might be attached to the resource for a blog via its class: .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Everyone class Blog(object): __acl__ = [ (Allow, Everyone, 'view'), (Allow, 'group:editors', 'add'), (Allow, 'group:editors', 'edit'), ] Or, if your resources are persistent, an ACL might be specified via the ``__acl__`` attribute of an *instance* of a resource: .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Everyone class Blog(object): pass blog = Blog() blog.__acl__ = [ (Allow, Everyone, 'view'), (Allow, 'group:editors', 'add'), (Allow, 'group:editors', 'edit'), ] Whether an ACL is attached to a resource's class or an instance of the resource itself, the effect is the same. It is useful to decorate individual resource instances with an ACL (as opposed to just decorating their class) in applications such as content management systems where fine-grained access is required on an object-by-object basis. Dynamic ACLs are also possible by turning the ACL into a callable on the resource. This may allow the ACL to dynamically generate rules based on properties of the instance. .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Everyone class Blog(object): def __acl__(self): return [ (Allow, Everyone, 'view'), (Allow, self.owner, 'edit'), (Allow, 'group:editors', 'edit'), ] def __init__(self, owner): self.owner = owner .. warning:: Writing ``__acl__`` as properties is discouraged because an ``AttributeError`` occurring in ``fget`` or ``fset`` will be silently dismissed (this is consistent with Python ``getattr`` and ``hasattr`` behaviors). For dynamic ACLs, simply use callables, as documented above. .. index:: single: ACE single: access control entry Elements of an ACL ------------------ Here's an example ACL: .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Everyone __acl__ = [ (Allow, Everyone, 'view'), (Allow, 'group:editors', 'add'), (Allow, 'group:editors', 'edit'), ] The example ACL indicates that the :data:`pyramid.authorization.Everyone` principal—a special system-defined principal indicating, literally, everyone—is allowed to view the blog, and the ``group:editors`` principal is allowed to add to and edit the blog. Each element of an ACL is an :term:`ACE`, or access control entry. For example, in the above code block, there are three ACEs: ``(Allow, Everyone, 'view')``, ``(Allow, 'group:editors', 'add')``, and ``(Allow, 'group:editors', 'edit')``. The first element of any ACE is either :data:`pyramid.authorization.Allow`, or :data:`pyramid.authorization.Deny`, representing the action to take when the ACE matches. The second element is a :term:`principal`. The third argument is a permission or sequence of permission names. A principal is usually a user id, however it also may be a group id if your authentication system provides group information. Each ACE in an ACL is processed by the ACL helper *in the order dictated by the ACL*. So if you have an ACL like this: .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Deny from pyramid.authorization import Everyone __acl__ = [ (Allow, Everyone, 'view'), (Deny, Everyone, 'view'), ] The ACL helper will *allow* everyone the view permission, even though later in the ACL you have an ACE that denies everyone the view permission. On the other hand, if you have an ACL like this: .. code-block:: python :linenos: from pyramid.authorization import Everyone from pyramid.authorization import Allow from pyramid.authorization import Deny __acl__ = [ (Deny, Everyone, 'view'), (Allow, Everyone, 'view'), ] The ACL helper will deny everyone the view permission, even though later in the ACL, there is an ACE that allows everyone. The third argument in an ACE can also be a sequence of permission names instead of a single permission name. So instead of creating multiple ACEs representing a number of different permission grants to a single ``group:editors`` group, we can collapse this into a single ACE, as below. .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import Everyone __acl__ = [ (Allow, Everyone, 'view'), (Allow, 'group:editors', ('add', 'edit')), ] .. _special_principals: .. index:: single: principal single: principal names Special Principal Names ----------------------- Special principal names exist in the :mod:`pyramid.authorization` module. They can be imported for use in your own code to populate ACLs, e.g., :data:`pyramid.authorization.Everyone`. :data:`pyramid.authorization.Everyone` Literally, everyone, no matter what. This object is actually a string under the hood (``system.Everyone``). Every user *is* the principal named "Everyone" during every request, even if a security policy is not in use. :data:`pyramid.authorization.Authenticated` Any user with credentials as determined by the current security policy. You might think of it as any user that is "logged in". This object is actually a string under the hood (``system.Authenticated``). .. index:: single: permission names single: special permission names Special Permissions ------------------- Special permission names exist in the :mod:`pyramid.authorization` module. These can be imported for use in ACLs. .. _all_permissions: :data:`pyramid.authorization.ALL_PERMISSIONS` An object representing, literally, *all* permissions. Useful in an ACL like so: ``(Allow, 'fred', ALL_PERMISSIONS)``. The ``ALL_PERMISSIONS`` object is actually a stand-in object that has a ``__contains__`` method that always returns ``True``, which, for all known authorization policies, has the effect of indicating that a given principal has any permission asked for by the system. .. index:: single: special ACE single: ACE (special) Special ACEs ------------ A convenience :term:`ACE` is defined representing a deny to everyone of all permissions in :data:`pyramid.authorization.DENY_ALL`. This ACE is often used as the *last* ACE of an ACL to explicitly cause inheriting authorization policies to "stop looking up the traversal tree" (effectively breaking any inheritance). For example, an ACL which allows *only* ``fred`` the view permission for a particular resource, despite what inherited ACLs may say, might look like so: .. code-block:: python :linenos: from pyramid.authorization import Allow from pyramid.authorization import DENY_ALL __acl__ = [ (Allow, 'fred', 'view'), DENY_ALL ] Under the hood, the :data:`pyramid.authorization.DENY_ALL` ACE equals the following: .. code-block:: python :linenos: from pyramid.authorization import ALL_PERMISSIONS __acl__ = [ (Deny, Everyone, ALL_PERMISSIONS) ] .. index:: single: ACL inheritance pair: location-aware; security ACL Inheritance and Location-Awareness -------------------------------------- While the ACL helper is in place, if a resource object does not have an ACL when it is the context, its *parent* is consulted for an ACL. If that object does not have an ACL, *its* parent is consulted for an ACL, ad infinitum, until we've reached the root and there are no more parents left. In order to allow the security machinery to perform ACL inheritance, resource objects must provide *location-awareness*. Providing *location-awareness* means two things: the root object in the resource tree must have a ``__name__`` attribute and a ``__parent__`` attribute. .. code-block:: python :linenos: class Blog(object): __name__ = '' __parent__ = None An object with a ``__parent__`` attribute and a ``__name__`` attribute is said to be *location-aware*. Location-aware objects define a ``__parent__`` attribute which points at their parent object. The root object's ``__parent__`` is ``None``. .. seealso:: See also :ref:`location_module` for documentations of functions which use location-awareness. .. seealso:: See also :ref:`location_aware`. .. index:: single: forbidden view Changing the Forbidden View --------------------------- When :app:`Pyramid` denies a view invocation due to an authorization denial, the special ``forbidden`` view is invoked. Out of the box, this forbidden view is very plain. See :ref:`changing_the_forbidden_view` within :ref:`hooks_chapter` for instructions on how to create a custom forbidden view and arrange for it to be called when view authorization is denied. .. index:: single: debugging authorization failures .. _debug_authorization_section: Debugging View Authorization Failures ------------------------------------- If your application in your judgment is allowing or denying view access inappropriately, start your application under a shell using the ``PYRAMID_DEBUG_AUTHORIZATION`` environment variable set to ``1``. For example: .. code-block:: text PYRAMID_DEBUG_AUTHORIZATION=1 $VENV/bin/pserve myproject.ini When any authorization takes place during a top-level view rendering, a message will be logged to the console (to stderr) about what ACE in which ACL permitted or denied the authorization based on authentication information. This behavior can also be turned on in the application ``.ini`` file by setting the ``pyramid.debug_authorization`` key to ``true`` within the application's configuration section, e.g.: .. code-block:: ini :linenos: [app:main] use = egg:MyProject pyramid.debug_authorization = true With this debug flag turned on, the response sent to the browser will also contain security debugging information in its body. Debugging Imperative Authorization Failures ------------------------------------------- The :meth:`pyramid.request.Request.has_permission` API is used to check security within view functions imperatively. It returns instances of objects that are effectively booleans. But these objects are not raw ``True`` or ``False`` objects, and have information attached to them about why the permission was allowed or denied. The object will be one of :data:`pyramid.authorization.ACLAllowed`, :data:`pyramid.authorization.ACLDenied`, :data:`pyramid.security.Allowed`, or :data:`pyramid.security.Denied`, as documented in :ref:`security_module`. At the very minimum, these objects will have a ``msg`` attribute, which is a string indicating why the permission was denied or allowed. Introspecting this information in the debugger or via print statements when a call to :meth:`~pyramid.request.Request.has_permission` fails is often useful. .. _admonishment_against_secret_sharing: Admonishment Against Secret-Sharing ----------------------------------- A "secret" is required by various components of Pyramid. For example, the helper below might be used for a security policy and uses a secret value ``seekrit``:: helper = AuthTktCookieHelper('seekrit') A :term:`session factory` also requires a secret:: my_session_factory = SignedCookieSessionFactory('itsaseekreet') It is tempting to use the same secret for multiple Pyramid subsystems. For example, you might be tempted to use the value ``seekrit`` as the secret for both the helper and the session factory defined above. This is a bad idea, because in both cases, these secrets are used to sign the payload of the data. If you use the same secret for two different parts of your application for signing purposes, it may allow an attacker to get his chosen plaintext signed, which would allow the attacker to control the content of the payload. Re-using a secret across two different subsystems might drop the security of signing to zero. Keys should not be re-used across different contexts where an attacker has the possibility of providing a chosen plaintext. .. index:: single: preventing cross-site request forgery attacks single: cross-site request forgery attacks, prevention .. _csrf_protection: Preventing Cross-Site Request Forgery Attacks --------------------------------------------- `Cross-site request forgery `_ attacks are a phenomenon whereby a user who is logged in to your website might inadvertently load a URL because it is linked from, or embedded in, an attacker's website. If the URL is one that may modify or delete data, the consequences can be dire. You can avoid most of these attacks by issuing a unique token to the browser and then requiring that it be present in all potentially unsafe requests. :app:`Pyramid` provides facilities to create and check CSRF tokens. By default :app:`Pyramid` comes with a session-based CSRF implementation :class:`pyramid.csrf.SessionCSRFStoragePolicy`. To use it, you must first enable a :term:`session factory` as described in :ref:`using_the_default_session_factory` or :ref:`using_alternate_session_factories`. Alternatively, you can use a cookie-based implementation :class:`pyramid.csrf.CookieCSRFStoragePolicy` which gives some additional flexibility as it does not require a session for each user. You can also define your own implementation of :class:`pyramid.interfaces.ICSRFStoragePolicy` and register it with the :meth:`pyramid.config.Configurator.set_csrf_storage_policy` directive. For example: .. code-block:: python from pyramid.config import Configurator config = Configurator() config.set_csrf_storage_policy(MyCustomCSRFPolicy()) .. index:: single: csrf.get_csrf_token Using the ``csrf.get_csrf_token`` Method ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To get the current CSRF token, use the :data:`pyramid.csrf.get_csrf_token` method. .. code-block:: python from pyramid.csrf import get_csrf_token token = get_csrf_token(request) The ``get_csrf_token()`` method accepts a single argument: the request. It returns a CSRF *token* string. If ``get_csrf_token()`` or ``new_csrf_token()`` was invoked previously for this user, then the existing token will be returned. If no CSRF token previously existed for this user, then a new token will be set into the session and returned. The newly created token will be opaque and randomized. .. _get_csrf_token_in_templates: Using the ``get_csrf_token`` global in templates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Templates have a ``get_csrf_token()`` method inserted into their globals, which allows you to get the current token without modifying the view code. This method takes no arguments and returns a CSRF token string. You can use the returned token as the value of a hidden field in a form that posts to a method that requires elevated privileges, or supply it as a request header in AJAX requests. For example, include the CSRF token as a hidden field: .. code-block:: html
Or include it as a header in a jQuery AJAX request: .. code-block:: javascript var csrfToken = "${get_csrf_token()}"; $.ajax({ type: "POST", url: "/myview", headers: { 'X-CSRF-Token': csrfToken } }).done(function() { alert("Deleted"); }); The handler for the URL that receives the request should then require that the correct CSRF token is supplied. .. index:: single: csrf.new_csrf_token Using the ``csrf.new_csrf_token`` Method ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To explicitly create a new CSRF token, use the ``csrf.new_csrf_token()`` method. This differs only from ``csrf.get_csrf_token()`` inasmuch as it clears any existing CSRF token, creates a new CSRF token, sets the token into the user, and returns the token. .. code-block:: python from pyramid.csrf import new_csrf_token token = new_csrf_token(request) .. note:: It is not possible to force a new CSRF token from a template. If you want to regenerate your CSRF token then do it in the view code and return the new token as part of the context. Checking CSRF Tokens Manually ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In request handling code, you can check the presence and validity of a CSRF token with :func:`pyramid.csrf.check_csrf_token`. If the token is valid, it will return ``True``, otherwise it will raise ``HTTPBadRequest``. Optionally, you can specify ``raises=False`` to have the check return ``False`` instead of raising an exception. By default, it checks for a POST parameter named ``csrf_token`` or a header named ``X-CSRF-Token``. .. code-block:: python from pyramid.csrf import check_csrf_token def myview(request): # Require CSRF Token check_csrf_token(request) # ... .. _auto_csrf_checking: Checking CSRF Tokens Automatically ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. versionadded:: 1.7 :app:`Pyramid` supports automatically checking CSRF tokens on requests with an unsafe method as defined by RFC2616. Any other request may be checked manually. This feature can be turned on globally for an application using the :meth:`pyramid.config.Configurator.set_default_csrf_options` directive. For example: .. code-block:: python from pyramid.config import Configurator config = Configurator() config.set_default_csrf_options(require_csrf=True) CSRF checking may be explicitly enabled or disabled on a per-view basis using the ``require_csrf`` view option. A value of ``True`` or ``False`` will override the default set by ``set_default_csrf_options``. For example: .. code-block:: python @view_config(route_name='hello', require_csrf=False) def myview(request): # ... When CSRF checking is active, the token and header used to find the supplied CSRF token will be ``csrf_token`` and ``X-CSRF-Token``, respectively, unless otherwise overridden by ``set_default_csrf_options``. The token is checked against the value in ``request.POST`` which is the submitted form body. If this value is not present, then the header will be checked. In addition to token based CSRF checks, if the request is using HTTPS then the automatic CSRF checking will also check the referrer of the request to ensure that it matches one of the trusted origins. By default the only trusted origin is the current host, however additional origins may be configured by setting ``pyramid.csrf_trusted_origins`` to a list of domain names (and ports if they are non-standard). If a host in the list of domains starts with a ``.`` then that will allow all subdomains as well as the domain without the ``.``. If no ``Referer`` or ``Origin`` header is present in an HTTPS request, the CSRF check will fail unless ``allow_no_origin`` is set. The special ``Origin: null`` can be allowed by adding ``null`` to the ``pyramid.csrf_trusted_origins`` list. It is possible to opt out of checking the origin by passing ``check_origin=False``. This is useful if the :term:`CSRF storage policy` is known to be secure such that the token cannot be easily used by an attacker. If CSRF checks fail then a :class:`pyramid.exceptions.BadCSRFToken` or :class:`pyramid.exceptions.BadCSRFOrigin` exception will be raised. This exception may be caught and handled by an :term:`exception view` but, by default, will result in a ``400 Bad Request`` response being sent to the client.