Extending an Existing Pyramid Application¶
If a Pyramid developer has obeyed certain constraints while building an application, a third party should be able to change the application's behavior without needing to modify its source code. The behavior of a Pyramid application that obeys certain constraints can be overridden or extended without modification.
We'll define some jargon here for the benefit of identifying the parties involved in such an effort.
The original application developer.
Another developer who wishes to reuse the application written by the original application developer in an unanticipated context. They may also wish to modify the original application without changing the original application's source code.
The Difference Between "Extensible" and "Pluggable" Applications¶
Other web frameworks, such as Django, advertise that they allow developers to create "pluggable applications". They claim that if you create an application in a certain way, it will be integratable in a sensible, structured way into another arbitrarily-written application or project created by a third-party developer.
Pyramid, as a platform, does not claim to provide such a feature. The platform provides no guarantee that you can create an application and package it up such that an arbitrary integrator can use it as a subcomponent in a larger Pyramid application or project. Pyramid does not mandate the constraints necessary for such a pattern to work satisfactorily. Because Pyramid is not very "opinionated", developers are able to use wildly different patterns and technologies to build an application. A given Pyramid application may happen to be reusable by a particular third party integrator because the integrator and the original developer may share similar base technology choices (such as the use of a particular relational database or ORM). But the same application may not be reusable by a different developer, because they have made different technology choices which are incompatible with the original developer's.
As a result, the concept of a "pluggable application" is left to layers built above Pyramid, such as a "CMS" layer or "application server" layer. Such layers are apt to provide the necessary "opinions" (such as mandating a storage layer, a templating system, and a structured, well-documented pattern of registering that certain URLs map to certain bits of code) which makes the concept of a "pluggable application" possible. "Pluggable applications", thus, should not plug into Pyramid itself but should instead plug into a system written atop Pyramid.
Although it does not provide for "pluggable applications", Pyramid does provide a rich set of mechanisms which allows for the extension of a single existing application. Such features can be used by frameworks built using Pyramid as a base. All Pyramid applications may not be pluggable, but all Pyramid applications are extensible.
Rules for Building an Extensible Application¶
There is only one rule you need to obey if you want to build a maximally
extensible Pyramid application: as a developer, you should factor any
overridable imperative configuration you've created into functions
which can be used via
pyramid.config.Configurator.include(), rather than
inlined as calls to methods of a Configurator within the
function in your application's
__init__.py. For example, rather than:
1from pyramid.config import Configurator 2 3if __name__ == '__main__': 4 config = Configurator() 5 config.add_view('myapp.views.view1', name='view1') 6 config.add_view('myapp.views.view2', name='view2')
You should move the calls to
add_view outside of the (non-reusable)
__name__ == '__main__' block, and into a reusable function:
1from pyramid.config import Configurator 2 3if __name__ == '__main__': 4 config = Configurator() 5 config.include(add_views) 6 7def add_views(config): 8 config.add_view('myapp.views.view1', name='view1') 9 config.add_view('myapp.views.view2', name='view2')
Doing this allows an integrator to maximally reuse the configuration statements that relate to your application by allowing them to selectively include or exclude the configuration functions you've created from an "override package".
Alternatively you can use ZCML for the purpose of making configuration extensible and overridable. ZCML declarations that belong to an application can be overridden and extended by integrators as necessary in a similar fashion. If you use only ZCML to configure your application, it will automatically be maximally extensible without any manual effort. See pyramid_zcml for information about using ZCML.
The fundamental "plug points" of an application developed using Pyramid
are routes, views, and assets. Routes are declarations made using the
pyramid.config.Configurator.add_route() method. Views are declarations
made using the
pyramid.config.Configurator.add_view() method. Assets are
files that are accessed by Pyramid using the pkg_resources API
such as static files and templates via a asset specification. Other
directives and configurator methods also deal in routes, views, and assets.
For example, the
add_handler directive of the
adds a single route and some number of views.
Extending an Existing Application¶
The steps for extending an existing application depend largely on whether the application does or does not use configuration decorators or imperative code.
If the Application Has Configuration Decorations¶
You've inherited a Pyramid application which you'd like to extend or
override that uses
pyramid.view.view_config decorators or other
configuration decoration decorators.
If you just want to extend the application, you can run a scan against the application's package, then add additional configuration that registers more views or routes.
1if __name__ == '__main__': 2 config.scan('someotherpackage') 3 config.add_view('mypackage.views.myview', name='myview')
If you want to override configuration in the application, you may need to
pyramid.config.Configurator.commit() after performing the scan of the
original package, then add additional configuration that registers more views
or routes which perform overrides.
1if __name__ == '__main__': 2 config.scan('someotherpackage') 3 config.commit() 4 config.add_view('mypackage.views.myview', name='myview')
Once this is done, you should be able to extend or override the application like any other (see Extending the Application).
You can alternatively just prevent a scan from happening by omitting
any call to the
pyramid.config.Configurator.scan() method. This will
cause the decorators attached to objects in the target application to do
nothing. At this point, you will need to convert all the configuration done in
decorators into equivalent imperative configuration or ZCML, and add that
configuration or ZCML to a separate Python package as described in
Extending the Application.
Extending the Application¶
To extend or override the behavior of an existing application, you will need to create a new package which includes the configuration of the old package, and you'll perhaps need to create implementations of the types of things you'd like to override (such as views), to which they are referred within the original package.
The general pattern for extending an existing application looks something like this:
Create a new Python package. The easiest way to do this is to create a new Pyramid application using our cookiecutter. See Creating the Project for more information.
In the new package, create Python files containing views and other overridden elements, such as templates and static assets as necessary.
Install the new package into the same Python environment as the original application (e.g.,
$VENV/bin/pip install -e .or
$VENV/bin/pip install .).
mainfunction in the new package's
__init__.pyto include the original Pyramid application's configuration functions via
pyramid.config.Configurator.include()statements or a scan.
Wire the new views and assets created in the new package up using imperative registrations within the
mainfunction of the
__init__.pyfile of the new application. This wiring should happen after including the configuration functions of the old application. These registrations will extend or override any registrations performed by the original application. See Overriding Views, Overriding Routes, and Overriding Assets.
The view configuration declarations that you make which override
application behavior will usually have the same view predicate
attributes as the original that you wish to override. These
declarations will point at "new" view code in the override package that you've
created. The new view code itself will usually be copy-and-paste copies of
view callables from the original application with slight tweaks.
For example, if the original application has the following
1def configure_views(config): 2 config.add_view('theoriginalapp.views.theview', name='theview')
You can override the first view configuration statement made by
configure_views within the override package, after loading the original
1from pyramid.config import Configurator 2from originalapp import configure_views 3 4if __name == '__main__': 5 config = Configurator() 6 config.include(configure_views) 7 config.add_view('theoverrideapp.views.theview', name='theview')
In this case, the
theoriginalapp.views.theview view will never be executed.
Instead, a new view,
theoverrideapp.views.theview will be executed when
request circumstances dictate.
A similar pattern can be used to extend the application with
declarations. Just register a new view against some other set of predicates to
make sure the URLs it implies are available on some other page rendering.
Route setup is currently typically performed in a sequence of ordered calls to
add_route(). Because these calls are
ordered relative to each other, and because this ordering is typically
important, you should retain their relative ordering when performing an
override. Typically this means copying all the
add_route statements into
the override package's file and changing them as necessary. Then exclude any
add_route statements from the original application.
Assets are files on the filesystem that are accessible within a Python
package. An entire chapter is devoted to assets: Static Assets.
Within this chapter is a section named Overriding Assets. This
section of that chapter describes in detail how to override package assets with
other assets by using the
method. Add such
override_asset calls to your override package's
__init__.py to perform overrides.